0
Add to Cart
The Nema 42 3 phase hybrid stepper motor is a modular motor designed based on three independent motor modules. Each module has a rotor and a stator that can rotate and position independently. These modules can be connected together by screws or welding to create a complete motor.
The Nema 42 3 phase hybrid stepper motor has the following characteristics:
Modular design: The motor adopts a modular design, consisting of three independent motor modules, each with an independent rotor and stator. This design allows users to easily replace and upgrade motor modules, and can choose different module combinations according to different application requirements.
High torque: The Nema 42 3 phase hybrid stepper motor has high torque and can meet the application requirements of heavy loads and high speeds.
Low noise: Due to its modular design and special design of the stator winding, the Nema 42 3 phase hybrid stepper motor usually has the characteristic of low noise, which can meet the application needs of operating in low noise environments.
Wide range of motion control options: The Nema 42 3 phase hybrid stepper motorcan provide a wide range of motion control options such as position control, speed and acceleration control, allowing users to choose the most suitable control method according to different application requirements.
Long term operational reliability: Due to the modular design of the Nema 42 3 phase hybrid stepper motor, which is usually manufactured from high-quality materials and components, it has long-term operational reliability and can meet the application requirements that require long-term operation.
| Item | Specifications |
| Step Angle Accuracy | ±5% |
| Resistance Accuracy | ±10% |
| Inductance Accuracy | ±20% |
| Temperature Rise | 80℃ Max. |
| Ambient Temperature | ﹣20℃~﹢50℃ |
| Insulation Resistance | 100MΩMin 500VDC |
| Dielectric Strength | 500V AC 1minute |
| Allowable Radial Load | 0.02mm Max.(450g load) |
| Allowable Thrust Load | 0.08mm Max.(450g load) |
| Model | ShaftΦ(mm) | Shaft Type(mm) | Shaft L(mm) |
| 110BYG350-134 | 19 | Platform6×6×25 | 42 |
| 110BYG350-162 | 19 | Platform6×6×25 | 42 |
| 110BYG350-194 | 19 | Platform6×6×25 | 42 |
| 110BYG350-233 | 19 | Platform6×6×25 | 42 |
| 110BYG350-253 | 19 | Platform6×6×25 | 42 |
| 110BYG350-285 | 19 | Platform6×6×25 | 42 |
| Model | Stepangle(°) | Length(mm) | Voltage(V) | Current (A/phase) | Resistance (Ω/phase) | Inductance (mH/phase) | Hold Torque (N.m) | Rotor Inertia (g.cm²) | Leads | Weight(kg) |
| 110BYG350-134 | 1.2 | 134 | 9.5 | 3 | 3.15 | 17 | 8 | 9750 | 3 | 7.8 |
| 110BYG350-162 | 162 | 12.6 | 3 | 4.2 | 22 | 13 | 12100 | 3 | 8.3 | |
| 110BYG350-194 | 194 | 10.7 | 5 | 2.14 | 17.5 | 16 | 15300 | 3 | 10.5 | |
| 110BYG350-233 | 233 | 9.7 | 5 | 1.93 | 23 | 20 | 18600 | 3 | 12.6 | |
| 110BYG350-253 | 253 | 12 | 5 | 2.4 | 24.4 | 22 | 21000 | 3 | 13.1 | |
| 110BYG350-285 | 285 | 14.5 | 5 | 2.9 | 27 | 25 | 24300 | 3 | 14.8 |
*Note:We can manufacture products according to customer's requirements.
